These Cylinders Can Be Used In A Wide Variety Of Applications And Conditions And Can Take The Daily Abuse Associated With Typical Tailgate Applications. They Are Backed With A 1 Year Warranty And Are 100% Tested! Available In Push/Pull, Solenoid Operated And Spring Return Versions. At 100 psi: Thrust Is 962 lb, Draw Is 918 lb.
General Info
Type
Cylinder Construction
Smooth Cylinder Grade Aluminum Tubing With A 32 RMS Finish, Tie Rod Construction Secures End Caps To Tube
Front Cover
Die Cast Aluminum With Nitrile Dirt Wiper And Pressure Seal And Oil Impregnated Bronze Bushing And 1/4” NPT Port
Rear Cover
Die Cast Aluminum With Mounting Hole For 1/2" Clevis Pin And 1/4” NPT Port
Piston Cup
Emralon-Coated, Single Piece, Molded Piston Cup
Piston Rod
5/8" Diameter 300 Series Stainless Steel With 5/8" - 18 Thread
Temp Rating
-20 Degrees Fahrenheit To +185 Degrees Fahrenheit
Pressure Rating
10 Psi Minimum To 120 Psi Maximum
Standard Operating Pressure 100 Psi
 
Part # Cylinder Type Stroke Retracted Length Extended Length 100131 Push/Pull 6.68" 13.60" 20.28" 100132 Push/Pull 8.68" 15.60" 24.28" 100136 Push/Pull 8.68" 18.43" 27.12" 100137 Push/Pull 8.68" 15.60" 24.28"  
- 300 Service Stainless Steel Cylinder Shafts Provide Excellent Corrosion Resistance And Extended Cycle Life -Cylinders Tested To Over 500000 Cycles
- Lightweight, Corrosion Resistant Aluminum Cylinder Tube With Die Cast Aluminum End Caps
- Rear Clevis Cast As Integral Part Of The Rear Cover For Improved Durability And Mounting Integrity
- Double Acting, Emralon-Coated Piston Cup Assures Smooth Long Lasting Operation Even In Cold Weather Conditions (To -40F)
- Front End Cap Assembly Includes Pressure Seal, Dirt Seal And Oil Impregnated Bronze Bushing
- Cylinder Tube Imprinted With Part Number And Date Code For Quick Identification
- All Cylinders Are Factory Pressure And Leak Tested Prior To Shipping
- Front Cover Kit-Includes Front Cover With Bushing And Seals Installed And Two Cylinder Gaskets
- Rear Cover Kit-Includes Rear Cover With Two Cylinder Gaskets
- Piston Cup Kit-Includes Piston Cup, Lock Nut And Two Cylinder Gaskets
- Shaft Kit-Includes Shaft, Lock Nut And Two Cylinder Gaskets
- Sold Each
- Velvac
Description
- Push/Pull, 4" Stroke, 9.89" Retracted Length, 13.89" Extended Length, 491 lb Thrust At 100 psi, 460 lb Draw At 100 psi(VV-100204)
- Push/Pull, 6" Stroke, 11.89" Retracted Length, 17.89" Extended Length, 491 lb Thrust At 100 psi, 460 lb Draw At 100 psi(VV-100206)
- Push/Pull, 8" Stroke, 13.89" Retracted Length, 21.89" Extended Length, 491 lb Thrust At 100 psi, 460 lb Draw At 100 psi(VV-100208)
- Spring Return, 6" Stroke, 13.75" Retracted Length, 19.75" Extended Length, 251 lb Thrust At 100 psi, 460 lb Draw At 100 psi(VV-100226)
Associated Skus
- Fits Most Makes and Models
Fitment
